Features:

Provides absolute calibrated concentrations for H2O2in a single measuring channel. Fully automated operation using internal micro controller. Automated calibration using liquid H2O2 standards. Ranges : 0 to 30.0 µg/l (free programmable) 0 to 0.300 mg/l 0 to 3.0* mg/l H2O2 liquid phase detection limit of < 70 ng/l** Rugged and simple to use. RS232 link for remote access and control.

Instrument Specifications The instrument has multiple, free programmable measuring ranges. The calibration can be defined by user within the ranges given below. Liquid phase measurements provides calibration by liquid peroxide standard for example:          : 0 to 30.0  µg/l : 0 to  300.0 mg/l : 0 to 3.0  mg/l* * Higher concentrations on request. Detection limit: < 0.07 µg/l** equivalent to:  2 * 10-9 M ** only when calibrated for 30.0 µg/l Noise (each channel) < 2% at full scale Time constant 40 sec (10-90%) delay time 240 sec Interferences from O3 +30 ppt H2O2/100 ppb NO +12 ppt H2O2/100 ppb No detectable interference from: SO2, PAN, NO2, Glyoxal, Isobutane, Isobutylene, 1-Butane, Formaldehyde, Benzene, Toluene, Methanol, Acetone, Methylamine, Dimethylamine, n-Butane, Cis-2-Butene, Trans-2-Butene, and Ions such as Iodide, Chloride, Nitrate, Bromide, Phosphate, Benzoate Zeroing: Using Water free of peroxides Calibration: Using liquid H2O2-standards Signal Output Analog: 0-5 Volts FS. calibration sets automatically output to 4.0 Volt of maximum value of chosen range. Digital: via RS 232 interface Operating Temp.: 20 to 40 degrees C 5 to 95% rel. humid Physical Dim.: Length 49,6 cm Weight 48,8 cm Height 13,0 cm Weight 22,5 Kg Power Requirem.: 120/240VAC, 80 Watts (18 to 36 V DC on request). Consumables Destilled Water Solution AL1 and AL2, NaOH, HCl, H2O2-standard solution for calibration. Maint. Interval: 1 Month